燕山大学教师个人主页系统彭艳--中文主页--论文成果

更多

彭艳(教师)

博士生导师硕士生导师
职称 : 教授
学科 :
机械设计及理论
单位 : 机械工程学院

学位 : 博士学位
学历 : 博士研究生毕业
职务 : 教师
出生年月 : 1971-11
入职时间 : 1994-07-01
毕业院校 : 燕山大学

论文成果

[161] 于丙强.刘宏民,杨利坡,彭艳,李志明.A New Type of Contact Shape Meter and Its Industry Application.2009
[162] 牛山.孙建亮,彭艳.旋转锤式连铸坯去毛刺机故障分析与改进.2013
[163] 张阳.孙建亮,彭艳.板带轧机刚体柔体耦合振动系统的建模研究.2016
[164] 彭艳.孙建亮.考虑上/下工作辊非对称运动的热轧机水平振动研究.2017
[165] 彭艳.Dynamic modeling of gauge control system based on thickness gauge and design of H<inf>∞</inf> robust controller.2009
[166] 贾斌.彭艳.考虑微观组织演变的多道次热轧有限元模拟.2013
[167] 大型铝合金筒节轧制过程圆度控制及影响因素分析.2021
[168] 彭艳.石宝东.工业纯钛板材冷轧粘辊机理及影响因素探讨与研究.2016
[169] 彭艳.Model of austenite transformation and temperature coupling for hot rolled strip during cooling process.2009
[170] 王玉辉.王天生,彭艳.Hall-Petch strengthening in Fe-34.5Mn-0.04C steel cold-rolled, partially recrystallized and fully recrystallized.2018
[171] 彭艳.Mechanism of and key technologies for copper bonding in the hot rolling of SCR continuous casting and polling.2021
[172] 彭艳.Theoretical Model and Experimental Study of Dynamic Hot Rolling.2021
[173] 李艺君.彭艳,付瑞东.Tensile properties and fracture behavior of friction stir welded joints of Fe-32Mn-7Cr-1Mo-0.3N steel at cryogenic temperature.2018
[174] 彭艳.The Research of Hot Deformation Behavior of Low-alloy Steel.2009
[175] 李志明.于丙强,彭艳,刘宏民.A Shape Measurement System for Cold-Rolled Steel Strip Based on DSP.IEEE Computer Society.2009
[176] 王玉辉.彭艳,王天生.Laminated Fe-34.5 Mn-0.04C composite with high strength and ductility.2018
[177] 张洪旺.张春玲,彭艳,王玉辉.On the microstructural evolution pattern toward nano-scale of an AISI 304 stainless steel during high strain rate surface deformation.2020
[178] 陈素文.彭艳,刘宏民,孙建亮.Slab analysis of large cylindrical shell rolling considering mixed|friction.2014
[179] 彭艳.冷轧带钢平整机高精度高速度轧制力模型开发.2008
[180] 彭艳.Static Recrystallization Kinetics Model After Hot Deformation of Low-Alloy Steel Q345B.2010

共218条 9/11

首页上页下页尾页页

同学科博导

同学科硕导

扫一扫用手机查看