燕山大学教师个人主页系统彭艳--中文主页--论文成果

更多

彭艳(教师)

博士生导师硕士生导师
职称 : 教授
学科 :
机械设计及理论
单位 : 机械工程学院

学位 : 博士学位
学历 : 博士研究生毕业
职务 : 教师
出生年月 : 1971-11
入职时间 : 1994-07-01
毕业院校 : 燕山大学

论文成果

[181] 彭艳.Dynamic model building of thickness control system for four-high rolling mill and HCO<inf>∞</inf> robust controller design.2009
[182] 彭艳.Free transverse vibration of rolls for four-high mill.2009
[183] 孙建亮.彭艳.基于配合辊系的楔形板矫直工艺.2019
[184] 偏载状态下轧机轴承接触力学模型研究.2021
[185] 高亚南.孙建亮,彭艳.1580热连轧机F2精轧机振动综合测试与分析.2013
[186] 彭艳.Gauge and shape control strategy for DC mill.2011
[187] 王玉辉.王天生,彭艳.Hot Deformation Behavior and Processing Maps of Fe-30Mn-0.11C Steel.2018
[188] 张嘉欣.彭艳,王玉辉,王天生.Microstructure Evolution and Tensile Properties of Cold-Rolled and Annealed Fe-30Mn-0.14C-7Cr-0.26Ni Steel.2021
[189] 杨冲.石宝东,彭艳.Loading path dependent distortional hardening of Mg alloys: Experimental investigation and constitutive modeling on cruciform specimens.2019
[190] Constitutive relationship of hot deformation of X80 pipeline steel.IEEE Computer Society.2010
[191] 李艺君.付瑞东,彭艳.Abnormal Grain Growth in the Heat Affected Zone of Friction Stir Welded Joint of 32Mn-7Cr-1Mo-0.3N Steel during Post-Weld Heat Treatment.2018
[192] 王鹏飞.刘宏民,王东城,彭艳.1450 mm冷连轧机多变量最优板形闭环控制策略研究与应用.2014
[193] 彭艳.Vibration of Moving Strip With Distributed Stress in Rolling Process.2010
[194] 孔玲.彭艳.非均匀温度场下变梯度特性热成形技术研究.2017
[195] 彭艳.Development and application of a new method for evaluating shape controllability of rolling mills for flat products.2016
[196] 孙建亮.郝露菡,彭艳,戚向东.大型筒节台阶式临界区正火热处理工艺.2015
[197] 石宝东.彭艳.AZ31镁合金轧制板材各向异性力学性能研究.2015
[198] 刘胜伟.彭艳,高新亮,石宝东.基于晶体塑性理论镁合金塑性变形行为研究概述.2018
[199] A3-D differential method for solving rolling force of PC hot strip mill.2010
[200] 彭艳.刘宏民.Situations and Prospects of the Study on Steel Warm Rolling.Trans Tech Publications.2012

共218条 10/11

首页上页下页尾页页

同学科博导

同学科硕导

扫一扫用手机查看