燕山大学教师个人主页系统马瑞--中文主页--论文成果

更多

马瑞

博士生导师硕士生导师
职称 : 教授
单位 : 机械工程学院

学位 : 博士学位
学历 : 博士研究生毕业
出生年月 : 1978-02
入职时间 : 2006-10-16
毕业院校 : 燕山大学

论文成果

[1] 马瑞.赵军.Study on the influence of the shape and properties of Q345R welded joints on stress concentration and fatigue life.2023
[2] 马瑞.赵军,翟瑞雪.Study on Hot Deformation Behavior and Bending Forging Process of 7075 Aluminum Alloy.2023
[3] 马瑞.Intelligent Control System of Deep Drawing for.IEEE CS' CPS.2010
[4] 王伟.马瑞,马瑞,赵军,翟瑞雪.Arrhenius-Type Constitutive Model and Dynamic Recrystallization Behavior of 20Cr2Ni4A Alloy Carburizing Steel.2017
[5] 马瑞.Research On Intelligent Deep Drawing Technology Of Sheet Metal.2010
[6] 曹宏强.赵军,马瑞,马瑞,赵军.大型轴管类件过弯矫直等价原理实验.2012
[7] 马瑞,马瑞.翟瑞雪,赵军.An Iterative Compensation Algorithm for Springback Control in Plane Deformation and Its Application.2019
[8] 赵军.马瑞,孙红磊,马瑞,屈晓阳.Study on intelligent control technology for forming steel pipe of pipeline with JCO process.2011
[9] 赵军.马瑞,马瑞,翟瑞雪.Prediction and control of springback in setting round process for|pipe-end of large pipe.2014
[10] 王浩然.马瑞,马瑞,赵军.Constitutive Equations for Describing the Hot Compressed Behavior of TC4–DT Titanium Alloy.2020
[11] 马瑞.大型直缝焊管挠度检测系统关键技术研究.2012
[12] 王伟.马瑞,马瑞.铸锻联合成形工艺晶粒分布预测协同仿真技术.2017
[13] 马瑞.Research on Intelligent Deep Drawing Technology of Sheet Metal.2010
[14] 黄学颖.马瑞,马瑞,于高潮,赵军.Numerical simulation and experimental investigations on a three-roller setting round process for thin-walled pipes.2020
[15] 翟瑞雪.马瑞,马瑞,赵军.Study on the Iterative Compensation Method for Continuous Varying Curvature Free Bending.2021
[16] Wang.马瑞,马瑞,翟瑞雪.Constitutive analysis and dynamic recrystallization behavior of as-cast 40CrNiMo alloy steel during isothermal compression.2020
[17] 赵军.马瑞,马瑞,翟瑞雪.Springback theory of plane bending and the progress of study on its engineering application.2013
[18] 赵军.马瑞,曹宏强,马瑞.纯弯曲过弯矫直等价原理及其试验验证.2012
[19] 翟瑞雪.马瑞,马瑞.Hot Deformation Behavior and Processing Map of As-Cast 40CrNiMo Alloy Steel.2020
[20] 赵军.马瑞,孙红磊,马瑞.大型直缝焊管四点弯曲JCOC成形新工艺.2012

共55条 1/3

首页上页下页尾页页

扫一扫用手机查看