燕山大学教师个人主页系统翟瑞雪--中文主页--论文成果

翟瑞雪(系副主任（主持工作）)

硕士生导师
职称 : 副教授
学科 :
材料加工工程
单位 : 机械工程学院

学位 : 博士学位
学历 : 博士研究生毕业
职务 : 系副主任（主持工作）
出生年月 : 1984-09
入职时间 : 2014-01-04
毕业院校 : 燕山大学

论文成果

[1] 马瑞,马瑞.翟瑞雪,赵军.An Iterative Compensation Algorithm for Springback Control in Plane Deformation and Its Application.2019
[2] Wang.马瑞,马瑞,翟瑞雪.Constitutive analysis and dynamic recrystallization behavior of as-cast 40CrNiMo alloy steel during isothermal compression.2020
[3] 翟瑞雪.马瑞,马瑞,赵军.Study on the Iterative Compensation Method for Continuous Varying Curvature Free Bending.2021
[4] 赵军.马瑞,翟瑞雪,马瑞.Prediction and control of springback in setting round process for|pipe-end of large pipe.2014
[5] 马瑞,马瑞.翟瑞雪,赵军.Convergence Criteria for Springback Iterative Compensation in Plane Deformation and Its Application.2018
[6] 于高潮;赵军;马瑞;翟瑞雪.马瑞,赵军,马瑞,翟瑞雪.往复弯曲统一曲率定理及其试验验证.2016
[7] 翟瑞雪.于高潮,赵军.Intelligent Control System of Internal Expansion over Bending and Calibration (IEOBC) Process for Large Pipe Ends.2021
[8] 赵军.马瑞,马瑞,翟瑞雪.平面弯曲弹复理论及其工程应用研究进展.2016
[9] 王伟.马瑞,马瑞,赵军,翟瑞雪.Arrhenius-Type Constitutive Model and Dynamic Recrystallization Behavior of 20Cr2Ni4A Alloy Carburizing Steel.2017
[10] 翟瑞雪.马瑞,钱志平,赵军,马瑞.矩形截面型材平面拉弯弹复解析和试验验证.2014
[11] 王伟.马瑞,赵军,翟瑞雪,马瑞.Variable contour two-step warm extrusion forming of spur gear and the deformation behavior of 20Cr(2)Ni(4)A steel.2017
[12] 翟瑞雪.于高潮.Analytical Prediction of Stretch-Bending Springback Based on the Proportional Kinematic Hardening Model.2021
[13] 赵军.于高潮,翟瑞雪.Cross-sectional distortion of LSAW pipes in over-bend straightening process.2018
[14] 翟瑞雪.马瑞,马瑞.Hot Deformation Behavior and Processing Map of As-Cast 40CrNiMo Alloy Steel.2020
[15] 翟瑞雪.Stretch bending and springback of profile in the loading method of prebending and tension.2018
[16] 于高潮.赵军,翟瑞雪.大型直缝焊管三辊连续矫圆工艺（英文）.2021
[17] 翟瑞雪.赵军.Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect.2022
[18] 于高潮.翟瑞雪,赵军.基于往复弯曲方式的矫形工艺研究进展.2022
[19] 赵军.翟瑞雪,于高潮.Springback prediction of multiple reciprocating bending based on different hardening models.2022
[20] 于高潮.翟瑞雪,赵军.Prediction model of forming force on single-roller bending (SRB) and two-roller bending (TRB) process.2022

共27条 1/2

首页上页下页尾页页

同学科硕导

扫一扫用手机查看