燕山大学教师个人主页系统于高潮--中文主页--论文成果

于高潮(塑性成形工程系副主任)

博士生导师硕士生导师
职称 : 副教授
学科 :
材料加工工程
机械设计及理论
单位 : 机械工程学院

学位 : 博士学位
学历 : 博士研究生毕业
职务 : 塑性成形工程系副主任
出生年月 : 1988-12
毕业院校 : 燕山大学

论文成果

[1] 于高潮.赵军,孙红磊.A mechanical model of axial and circumferential bidirectional deformation for large thin-walled pipes in the process of continuous and synchronous calibration of roundness and straightness by three rollers.2021
[2] 于高潮.Theoretical analysis and numerical simulation on the process mechanism of two-roller straightening.2018
[3] 翟瑞雪.赵军,于高潮.Intelligent Control System of Internal Expansion over Bending and Calibration (IEOBC) Process for Large Pipe Ends.2021
[4] 黄学颖.马瑞,马瑞,于高潮,赵军.Numerical simulation and experimental investigations on a three-roller setting round process for thin-walled pipes.2020
[5] 赵军.于高潮.Deflection detection and curve fitting in three-roll continuous straightening process for LSAW pipes.2018
[6] 赵军.于高潮,翟瑞雪.Cross-sectional distortion of LSAW pipes in over-bend straightening process.2018
[7] 于高潮.翟瑞雪,赵军.Hardening model of anisotropic sheet metal during the diffuse instability necking stage of uniaxial tension.2021
[8] 翟瑞雪.于高潮.Analytical Prediction of Stretch-Bending Springback Based on the Proportional Kinematic Hardening Model.2021
[9] 于高潮.赵军.Evolution of Mechanical Properties in Cyclic Tension-compression Loading on Sheet Metal聽聽聽聽(Open Access).2019
[10] 于高潮.赵军,孙红磊.Study on a straightening process by reciprocating bending for metal profiles.2021
[11] 张致远.于高潮,赵军.Research on Four-Point Air Bending Process and Contour Detection Method for JCO Forming Process of LSAW Pipes.2019
[12] 赵军.于高潮.中小型轴类零件旋转弯曲矫直工艺数值模拟研究.2022
[13] 赵军.孙红磊,于高潮.金属薄板厚向异性系数R值的确定方法及其在后继屈服中的演化.2022
[14] 赵军.于高潮.Limitation analysis of the Hill48 yield model and establishment of its modified model for planar plastic anisotropy.2022
[15] 赵军.于高潮.Analysis of three-roller continuous and synchronous calibration process of straightness and ovality for large thin-walled pipes considering the weld.2022
[16] 于高潮.赵军.Pure-Bend and Over-Bend Straightening Theory for In-Plane Curved Beams with Symmetrical Section and Straightening Mechanism Analysis.2022
[17] 于高潮.翟瑞雪,赵军.基于往复弯曲方式的矫形工艺研究进展.2022
[18] 于高潮.曹宏强.A novel cold stamping process of large extrados single-welded elbow suitable for internal high pressure.2022
[19] 赵军.翟瑞雪,于高潮.Springback prediction of multiple reciprocating bending based on different hardening models.2022
[20] 赵军.于高潮,孙红磊.Anisotropic hardening and evolution of r-values for sheet metal based on evolving non-associated Hill48 model.2022

共28条 1/2

首页上页下页尾页页

个人简介

于高潮，副教授，博士生导师，河北省高等学校青年拔尖人才。主持国家自然科学基金青年项目和面上项目、中央引导地方科技发展资金项目、河北省高等学校青年拔尖人才项目、河北省自然科学基金、中国博士后科学基金面上资助项目等国家省部级项目，参与国家安全重大基础研究计划项目（国防973）子课题，国家科技重大专项子课题，国家自然科学基金，河北省自然科学基金以及多项企业技术攻关项目。在Journal of Materials Processing Technology、Thin-Walled Structures、Journal of Manufacturing Processes、Transactions of Nonferrous Metals Society of China、International Journal of Advanced Manufacturing Technology、机械工程学报等期刊发表论文50余篇，其中以第一作者或通讯作者发表SCI/EI收录期刊论文30余篇，申请和授权专利20余项。在金属塑性成形领域，形成了以板管成形理论及新工艺和板材智能成形技术为主的研究方向。

荣获中国专利优秀奖
荣获燕山大学优秀博士学位论文
荣获江苏机械工业科技进步一等奖
荣获江苏省科学技术奖三等奖

其他联系方式

邮编 :

通讯/办公地址 :

移动电话 :

邮箱 :

同学科博导

同学科硕导

扫一扫用手机查看