[1]. 1998.9- 2001.6
中国科学院金属研究所 |  材料学 |  博士研究生 |  博士
[2]. 1986.9- 1989.4
中国科学院金属研究所 |  材料学 |  硕士研究生 |  硕士
[3]. 1982.9- 1986.7
东北大学 |  物理学 |  大学本科毕业 |  学士
[1]. 2009.9- 至今
燕山大学 | 教授
[2]. 2007.4- 2009.8
九州大学(日本) | 研究员
[3]. 2003.7- 2007.3
丰桥技术科学大学(日本) | 研究员(JSPS fellow)
[4]. 2001.11- 2003.6
东京大学(日本) | 研究员
[5]. 1989.5- 1998.8
马鞍山钢铁公司钢研所 | 工程师/高级工程师
钱立和,燕山大学材料科学与工程学院、亚稳材料制备技术与科学国家重点实验室 教授,博士生导师。1986年于东北大学本科毕业,1989年和2001年于中科院金属研究所分别获得硕士和博士学位。
主要从事高性能结构材料的研究,其中包括高性能钢铁材料、铝合金及其复合材料的成分设计、微观组织调控、宏/微观力学行为、疲劳性能等研究工作。参加/负责完成了包括国家973计划、863计划、国家自然科学基金、河北省自然科学基金、日本新能源产业技术综合开发机构(NEDO)重大科技项目、日本学术振兴会科技项目(JSPS fellow)、以及日本文部科学省重大科技项目等在内的多项科技项目。
在Phys. Rev. Lett.、Acta Mater.、Appl. Phys. Lett.、Int. J. Plast、Scripta Mater. 等杂志上发表学术论文100余篇。
代表性论文:
1. L. Qian*, X. Cui, D. Li, S. Liu, J. Meng, F. Zhang, H. Xie, Cyclic deformation fields interactions between pores in cast high manganese steel, International Journal of Plasticity, 112 (2019) 18–35.
2. L. Zhao, L. Qian*, Q. Zhou, D. Li, T. Wang, Z. Jia, F. Zhang, J. Meng, The combining effects of ausforming and below-Ms or above-Ms austempering on thtransformation kinetics, microstructure and mechanical properties of low-carbon bainitic steel, Materials and Design, 183 (2019) 108123.
3. S. Liu, L. Qian*, J. Meng, D. Li, P. Ma, F. Zhang, Simultaneously increasing both strength and ductility of Fe-Mn-C twinning-induced plasticity steel via Cr/Mo alloying, Scripta Materialia 127 (2017) 10–14.
4. L. Zhao, L. Qian*, J.Meng, Q. Zhou, F. Zhang, Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels, Scripta Materialia 112 (2016) 96–100.
5. Q. Zhou, L. Qian*, J. Tan, J. Meng, F. Zhang, Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of transformation-induced plasticity steels, Materials Sciences and Engineering A, 578 (2013) 370-376.
6. P. Guo, Lihe Qian*, J. Meng, F. Zhang, L. Li, Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel, Materials Sciences and Engineering A, 584 (2013) 133–142.
7. L. Qian*, M. Todo, Y. Morita, Y. Matsushita, K. Koyano, Deformation analysis of the periodontium considering the viscoelasticity of the periodontal ligament, Dental Materials, 25 (2009) 1285-1292.
8. L. Qian*, H. Toda, K.Uesugi, T. Kobayashi, T.Ohgaki, M. Kobayahsi, Application of synchrotron x-ray microtomogrphy to investigate ductile fracture in Al alloys, Applied Physics Letters, 87 (2005) 241907.
9. L. Qian*, H. Toda, K. Uesugi, T. Kobayashi, M. Kobayahsi, Direct observation and image-based simulation of three-dimensional tortuous crack evolution inside opaque materials, Physical Review Letters, 100 (2008),115505.
10. L. Qian*, H. Toda, S. Nishido, T. Kobayashi, Experimental and numerical investigations of the effects of the spatial distribution of alpha-phase on fracture behavior in hypoeutectic Al-Si alloys, Acta Materialia, 54 (2006) 4881-4893.
邮编 :
通讯/办公地址 :
邮箱 :