燕山大学教师个人主页系统杜凤山--中文主页--论文成果

更多

杜凤山

博士生导师硕士生导师
职称 : 教授
单位 : 机械工程学院

学位 : 博士学位
学历 : 博士研究生毕业
出生年月 : 1960-09
入职时间 : 1982-07-20
毕业院校 : 东北重型机械工程学院

论文成果

[1] 王海军.杜凤山.圆成方辊弯成形孔型设计及工艺参数优化.2023
[2] 杜凤山.Reliability Prediction of Near-Isothermal Rolling of TiAl Alloy Based on Five Neural Network Models.2023
[3] 杜凤山.Effects of Sinusoidal Vibration of Crystallization Roller on Microstructure and Mechanical Properties of Ti/Al Laminated Composites by Twin-Roll Casting.2023
[4] 杜凤山.Effects of sinusoidal vibration of casting-roller on interface microstructure of Ti/Al laminated composites by twin-roll casting.2023
[5] 杜凤山.Effects of annealing on bonding strengthening mechanism of TFi/Al composite sheets by twin-roll casting with roller vibration.2023
[6] 王海军.杜凤山.Application of Mean Modulus in Three-Point Bending and Roll Forming.2023
[7] 牛振宇.杜凤山,于辉.A Novel Control Technique for Longitudinal Off-Corner Depressions on Wide Faces of Continuous Casting Slabs: Effect of the Mold Design on Controlling LOCDs.2023
[8] 牛振宇.杜凤山,于辉.A Novel Control Technique for Longitudinal Off-Corner Depressions on Wide Faces of Continuous Casting Slabs: Design of a Convex Structure Mold.2023
[9] 杜凤山.Prediction and Optimization of Wear Depth on Rectangular Tube Surface in Roll Forming.2023
[10] 徐凯.陈晓辉,杜凤山.Hydrogen transfer behavior and hydrogen affected zone formation of low alloy steel during thermoplastic deformation.2023
[11] 许志强.杜凤山.Analysis of the energy efficiency and control ability under different magnetic flux forms in RPECT.2023
[12] 杜凤山.板带轧制在线控制模型的研究（EI检索).2008
[13] 黄华贵.杜凤山.线棒材轧后冷却过程综合换热系数的实验测定.2014
[14] 杜凤山.许志强,黄华贵.双辊薄带铸轧中心线偏析机理与实验研究.2015
[15] 于凤琴.杜凤山.冷连轧机的喷水冷却参数对热辊型影响的研究.2014
[16] 庞沙沙.李学通,杜凤山.LG －730冷轧管机机架危险位置结构优化.2015
[17] 杜凤山.Effect of microstructures on fatigue crack propagation in 2E12 aluminum alloy.2010
[18] 杜凤山.黄华贵.大锻件微孔隙下的氢压模型及其应力场.2013
[19] 黄华贵.王巍,杜凤山.大棒材芯部疏松缺陷控制与负张力轧制工艺研究.2014
[20] 刘华.杜凤山.液滴在管间气流作用下的偏移特性.2016

共148条 1/8

首页上页下页尾页页

扫一扫用手机查看