燕山大学教师个人主页系统赵军--中文主页--论文成果

更多

赵军(人大代表)

职称 : 教授
单位 : 机械工程学院

学历 : 博士研究生毕业
职务 : 人大代表
出生年月 : 1957-12
毕业院校 : 哈尔滨工业大学

论文成果

[61] 于高潮.孙红磊,赵军.A mechanical model of axial and circumferential bidirectional deformation for large thin-walled pipes in the process of continuous and synchronous calibration of roundness and straightness by three rollers.2021
[62] 王浩然.马瑞,赵军,马瑞.Constitutive Equations for Describing the Hot Compressed Behavior of TC4–DT Titanium Alloy.2020
[63] 马瑞,马瑞.赵军,屈晓阳.大型直缝焊管JCOE成形CAPP系统.2013
[64] 赵军.于高潮.中小型轴类零件旋转弯曲矫直工艺数值模拟研究.2022
[65] 赵军.唐永福,黄建宇,邱海龙,张利强,李慧.Cryo-EM Studies of Atomic-Scale Structures of Interfaces in Garnet-Type Electrolyte Based Solid-State Batteries.2022
[66] 赵军.Friction Characteristics Analysis of Symmetric Aluminum Alloy Parts in Warm Forming Process.2022
[67] 赵军.A Novel Method for Friction Coefficient Calculation in Metal Sheet Forming of Axis-Symmetric Deep Drawing Parts.2022
[68] 赵军.A Novel Model Developed for Frictional Characteristics Analysis of Axial Symmetric Parts.2022
[69] 赵军.孙红磊,于高潮.金属薄板厚向异性系数R值的确定方法及其在后继屈服中的演化.2022
[70] 赵军.张福成,龙晓燕,杨志南.In-situ observation of phase transformation during heat treatment process of high-carbon bainitic bearing steel.2022
[71] 赵军.于高潮.Limitation analysis of the Hill48 yield model and establishment of its modified model for planar plastic anisotropy.2022
[72] 赵军.于高潮.Analysis of three-roller continuous and synchronous calibration process of straightness and ovality for large thin-walled pipes considering the weld.2022
[73] 于高潮.赵军.Pure-Bend and Over-Bend Straightening Theory for In-Plane Curved Beams with Symmetrical Section and Straightening Mechanism Analysis.2022
[74] 余为.唐永福,赵军,黄建宇,张利强.In Situ TEM Studies of the Oxidation of Li Dendrites at High Temperatures.2022
[75] 翟瑞雪.赵军.Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect.2022
[76] 于高潮.翟瑞雪,赵军.基于往复弯曲方式的矫形工艺研究进展.2022
[77] 赵军.翟瑞雪,于高潮.Springback prediction of multiple reciprocating bending based on different hardening models.2022
[78] 赵军.于高潮,孙红磊.Anisotropic hardening and evolution of r-values for sheet metal based on evolving non-associated Hill48 model.2022
[79] 于高潮.赵军.大型直缝焊管三辊连续复合矫形工艺.2022
[80] 于高潮.翟瑞雪,赵军.Prediction model of forming force on single-roller bending (SRB) and two-roller bending (TRB) process.2022

共109条 4/6

首页上页下页尾页页

扫一扫用手机查看