首页
科学研究
研究领域
论文成果
专利
著作成果
科研项目
教学研究
教学资源
授课信息
教学成果
获奖信息
招生信息
学生信息
教师博客
更多
骆俊廷
博士生导师 硕士生导师
职 称 : 教授
单 位 : 机械工程学院
学位 :
博士学位
学历 :
博士研究生毕业
出生年月 :
1975-07
入职时间 :
2005-03-14
毕业院校 :
哈尔滨工业大学
论文成果
[61] 顾勇飞.骆俊廷.球形件反复拉深成形有限元模拟及应力应变分析.2015
[62] 徐岩.顾勇飞,贾建波,骆俊廷.高压扭转变形2A12铝合金组织性能演变与断裂行为.2021
[63] 骆俊廷.Molecular dynamics simulation and experimental verification of the crystallization behavior of a Ti–Zr–Ni alloy prepared by SPS low temperature liquid phase sintering.2022
[64] 高士友.骆俊廷.Influences of laser remelting treatments on microstructure and tensile properties of multiphase Ni3Al-based intermetallic alloy.2022
[65] 顾勇飞.骆俊廷.环波反复模压剧烈塑性变形工艺仿真实验及优化.2022
[66] 张春祥.骆俊廷.A molecular dynamics study on the cyclic plastic deformation mechanism of Al-Mg alloys.2022
[67] 骆俊廷.张春祥.Microstructure prediction of multi-directional forging for 30Cr2Ni4MoV steel by the secondary development of Deform software and BP neural network.2022
[68] 张春祥.骆俊廷.Preparation of O′-Sialon-based ceramics by two-stage liquid phase sintering and study on the toughening mechanism of ultrafine-grained sintered clusters.2022
[69] 张春祥.骆俊廷.Microstructure evolution and grain refinement mechanism of fine-grained Mg-Gd-Y-Zn-Zr alloy during multi-directional forging.2022
[70] 张丽丽.骆俊廷.新型鼠标底座注射成形流动仿真及模具设计.2016
[71] Xue.骆俊廷.Research on alternate bulge-forming process of spherical parts in near equal-thickness wall and strain field analysis.2016
[72] 王振杰.骆俊廷.内旋压成形壳体的有限元分析.2015
[73] 顾勇飞.骆俊廷.纳米Si2N2O-Sialon陶瓷齿轮超塑性锻造研究.2012
[74] 铸造-冷挤压成形铜包铝线工艺及微观组织.2010
[75] 赵志勇.骆俊廷,顾勇飞.基于纳米压痕测试的超细晶Si_2N_2O-Si_3N_4陶瓷常温弹塑性仿真.2014
[76] Wang.骆俊廷.Processing and simulation of thin-walled shell with inner ribs formed by inner spinning technology.spie.2015
[77] Ya-hong,Xue.骆俊廷.Deep drawing of cup shell by powder cavity flexible forming technology.2017
[78] 顾勇飞.骆俊廷.筒形件粉末软凹模拉深数值模拟及实验.2014
[79] 骆俊廷.刘日平,顾勇飞,张春祥,张丽丽.Superplastic Forging for Sialon-based Nanocomposite at Ultralow Temperature in the Electric Field.2019
[80] 顾勇飞.张春祥,骆俊廷.5083 aluminum alloy sheet with excellent mechanical properties fabricated by constrained ring groove pressing based on a cyclic stress state.2021
共99条 4/5
首页
上页
下页
尾页
页
扫一扫用手机查看