燕山大学教师个人主页系统郭宝峰--中文主页--论文成果

更多

郭宝峰(无)

职称 : 教授
学科 :
材料加工工程
单位 : 机械工程学院

学历 : 博士研究生毕业
职务 : 无
出生年月 : 1958-04
毕业院校 : 燕山大学

论文成果

[41] 郭宝峰.金淼,陈雷.430 不锈钢热变形行为及高温起裂条件.2022
[42] 陈雷.金淼,郭宝峰.时效处理对Ti55531钛合金微观组织演变规律及力学性能的影响.2022
[43] 金淼.陈雷,郭宝峰.Experimental investigation on kinetic behavior of the deformation-induced α→β transformation during hot working of Ti–6Al–2Zr–1Mo–1V alloy below the β-transus.2022
[44] 邹宗园.宋春艳,金淼,郭宝峰.Elastic-Plastic Finite Element New Method for Lower Bound Shakedown Analysis.2022
[45] 许小奎.金淼,郭宝峰.基于对比度增强抑制灰度的改进优化准则法.2017
[46] 祁荣胜.刘鑫刚,郭宝峰,金淼.Formation Mechanism of Inclusion Defects in Large Forged Pieces.2016
[47] 祁荣胜.郭宝峰,陈雷,金淼,刘鑫刚.MnS热压缩陶瓷的制备及其高温应力应变曲线的测定.2015
[48] 刘鑫刚.郭宝峰.High-temperature fracture behavior of MnS inclusions based on GTN model.2019
[49] 刘鑫刚.郭宝峰,金淼.Study on Forming Technology of Aeronautical Landing Gear Strut Made of TC18 Titanium Alloy Using FEM.steel research international.2012
[50] 非对称循环载荷下Q235钢力学响应特性分析.2021
[51] 刘鑫刚.郭宝峰.Effect of MnS inclusions on deformation behavior of matrix based on in-situ experiment.2019
[52] 曹晓明.郭宝峰,姚静.Pump-valve Compound Control Performance of D+A Combined Multi-pump Controlled System.2018
[53] 许小奎.郭宝峰,金淼.基于密度体积插值方法的结构拓扑优化.2017
[54] 王灿.郭宝峰,刘鑫刚.Influence of inclusions on matrix deformation and fracture behavior based on Gurson-Tvergaard-Needleman damage model.2019
[55] 刘鑫刚.于琳琳,陈雷,郭宝峰.铸态6061铝合金均匀化热处理工艺.2016
[56] 金淼.郭宝峰,陈雷.氧化铝夹杂高温变形过程中的破碎机理.2020
[57] 宋清玉.郭宝峰.伺服压力机柔性加减速控制算法.2013
[58] 赵石岩.金淼,郭宝峰.Research on Influence of Forming Quality in Upsetting Forging Process of Marine Continuous Fiber Crankshaft.steel research international.2012
[59] 金淼.郭宝峰,刘鑫刚,季海鹏.316LN Dynamic Recrystallization and Microstructure Evolution.2012
[60] 王兵.郭宝峰.Study on deformation coordination in upsetting forging process of the crank of continuous fiber crankshaft for marine.Advanced Materials Research.2011

共67条 3/4

首页上页下页尾页页

扫一扫用手机查看